Concrete: Test section

Purpose: Enter the results for your concrete tests.

• Cylinder # text box: Enter the cylinder number for the current test set.
• Truck # text box: Display the truck number for the current test set.
• Add Strength button: Add an Add Strength section to your current test set.
• Breaks section: Enter the break data for the current test set.
  • Break Days button: Open the Break Days pop-up. 
    • Day selectors: Select what days your cylinders will be broken.
    • Cancel button: Exit the Break Days pop-up without saving your entry.
    • Accept button: Save your added break days and exit the pop-up.
  • Technician drop-down: Select the technician who acquired the cylinders.
  • Print Break Sheet button: Print the Break Sheet of the Fully Sunk Concrete report.
• Time Sampled section: Show the time and date the concrete was sampled.
• Date selector: Select and display the date the concrete was sampled.
• Time selector: Select and display the time the concrete was sampled.
• Now button: Set the Date and Time selectors to the current date and time.
• Equipment Settings section: Display the Equipment Settings.
• Air Meter text box: Enter and display the Air Meter Number.
• Calib Date selector: Select and display the date the air meter was last calibrated.
• Sample Locations Set Location button: Go to the Set Location page.
  
  • Add Location button: Select the location you sampled your concrete from.
• Water Was Added Yes/No buttons: Select if water was added to the concrete.
• Air Was Added Yes/No buttons: Select if air was added to the concrete.
• % Air text box: Enter the percent air test results.
• Air Temp text box: Enter the air temperature test results.
• Concrete Temp text box: Enter the concrete temperature test results.
• Slump text box: Enter the slump test results.
• Unit Weight text box: Enter the unit weight test results.
• Batch Time time-selection box: Select when the batch time was.
• IA Sample Yes/No buttons: Select if an IA was done on the current report.
• IA With text box: Enter the name of the inspector the IA was done with.
• Connected Report ID text box: Enter the ID of the connected report.
• Notes section: Enter any notes on the concrete tests.